Author Topic: [HELP]Where does these Sportrak's throttle body vacuum hose goes to  (Read 1422 times)

0 Members and 1 Guest are viewing this topic.

Offline sangprabv

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Need guidance of where does these Sportrak's throttle body vacuum hose goes to. Many thanks

Offline ag86IL

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 605
  • Karma: +8/-0
Re: [HELP]Where does these Sportrak's throttle body vacuum hose goes to
« Reply #1 on: January 29, 2017, 10:42:23 AM »
is the underhood sticker gone?

Offline sid_253

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Re: [HELP]Where does these Sportrak's throttle body vacuum hose goes to
« Reply #2 on: February 14, 2017, 12:30:32 AM »
1,2,3 and 4 are in attached workshop manual page no# 5 goes to pve valve on front of tappet cover between plugs 1 and 2 and pipe 6 goes to hose from tappet cover at back between plugs 3 and 4
This is how my Australian Feroza goes
check and see if 1,2,3 and 4 arn't loose in throttle body all four of mine face roughly the same way back along the manifold. If these are loose you may have vacuum issues

Offline Kaka do

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: [HELP]Where does these Sportrak's throttle body vacuum hose goes to
« Reply #3 on: October 05, 2018, 09:28:13 PM »
Thanks for the explanation and pictures.  I have used this post to put my hoses back where they should be and now she runs a whole lot better.

Now just need to sort out the water hoses to the thermal valve on the bottom of the throttle body as I have no water flow so always operating well above idle.
1993 SE Feroza (Go Fast Red) 😎 🇦🇺
50mm Tough Dog lift kit, 120A/H dual battery.