Author Topic: ARCHIVE: Head Bolts  (Read 12123 times)

0 Members and 1 Guest are viewing this topic.

alaskan ogre

  • Guest
Re: Head Bolts
« Reply #15 on: December 23, 2011, 07:51:21 AM »
Quote from: \"malodin\" post=2830197


Alaskan, thats cool you found some arp\'s the dimensions you gave him were they from a fresh head? Not ground or reused bolts?


Those specs I provided ARP were from a virgin (never surfaced) head.

malodin

  • Guest
Re: Head Bolts
« Reply #16 on: December 23, 2011, 08:59:05 AM »
Hmm, i know there are some that they could use that doesnt cost that much lol...i may have to dig in the archives and get ahold of the guy i was talking to and give him those specs compared to what my specs on a shaved head came in at

Hell with arp head studs and bolts over torqued 45degrees you could probably push 30-40psi boost lol(not saying anything for the internals holding up)

benmatthew

  • Guest
Re: Head Bolts
« Reply #17 on: August 31, 2012, 06:12:51 AM »
I think you should go for the stills head bolts, because this type of head bolts are really in demand.

alliance express | base pipe

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Head Bolts
« Reply #18 on: October 02, 2012, 12:30:47 AM »
Wahoo! I just mixed a big bowl of rocking horse manure with a healthy handful of chicken\'s teeth and came up with a complete set of oem head bolts from the local Toyota dealer/spares. Part numbers 90041-19791 and 90041-19589 and cheap too. Being shipped from Sydney, should arrive in a couple of days and have been confirmed in stock but last set. Might go buy myself a lotto ticket now :laugh:

As a point of interest I also found a set from Redline in Italy

http://www.bbfricambi.it/result.jsp?lang=4&mar=1604&mod=17736&cil=1600+16V++63+KW+-+70+KW&anno=%2801%2F88-%3E12%2F97%29+F300+-+F310&idv=17736&cat=%25

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Head Bolts
« Reply #19 on: October 04, 2012, 10:29:24 AM »
They arrived today. $85 and I\'m stoked. Definitely worth going back to basics if you\'re looking for a hard to find part, try Toyota,, you never know your luck.

malodin

  • Guest
Re: Head Bolts
« Reply #20 on: October 04, 2012, 11:04:11 AM »
What are the toyota part numbers and are they studs or just bolts?  With the toyota bolt part number i bet we can cross reference them to arp

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Head Bolts
« Reply #21 on: October 04, 2012, 01:29:13 PM »
They\'re the original factory bolt,w/washer Daihatsu part numbers 90041-19791 (x2) and 90041-19589 (x8)

If your ever looking for OEM numbers and they\'re not listed in the Warfs Parts list then try the following link, it\'s a fairly extensive list.

http://www.bbfricambi.it/result.jsp?lang=4&mar=1604&mod=17736&cil=1600+16V++63+KW+-+70+KW&anno=%2801%2F88-%3E12%2F97%29+F300+-+F310&idv=17736&cat=%25

malodin

  • Guest
Re: Head Bolts
« Reply #22 on: October 04, 2012, 02:22:30 PM »
Oh so you found original daihatsu part through a toyota dealership, i thought you were saying you found a interchange from a toyota motor...

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Head Bolts
« Reply #23 on: October 05, 2012, 11:24:35 AM »
@Malodin - Yeah sorry buddy, might\'ve got wound up in the excitement of stumbling across the mythical grail and not explained myself properly. It\'s sure saved me a lot of stuffing around and, as Im supercharging but only plan on running somewhere around 6 or 7 lbs of boost, I\'d imagine these will do the job fine, unless I\'m wrong of course in which case please speak up before I f**k up.

I\'m also looking for a quality head gasket if someone can help out and recommend one please.

malodin

  • Guest
Re: Head Bolts
« Reply #24 on: October 05, 2012, 11:36:54 AM »
Im pretty sure djcommie has been running a moderate amount of boost in hia charades for years.

As for a good quality headgasket email me or pm me i can hook you up if you cant find the one that is listed on this website.....DONT GET IT OFF EBy

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Head Bolts
« Reply #25 on: October 05, 2012, 10:22:40 PM »
Thanks mate

Offline brushhippie

  • Administrator
  • Hero Member
  • *****
  • Posts: 1693
  • Karma: +11/-0
Re: ARCHIVE: Head Bolts
« Reply #26 on: February 13, 2018, 02:19:41 PM »
Well no wonder I could not find the post..it was a sticky!..OK so as far as I kow I am the only who has ordered the head studs from ARP...arrived right on time and undamaged...all together shipped from Cali to Mo was $230...a small price to pay to be done finally with head gasket issues...let us hope!

Offline Bowie Kid

  • Newbie
  • *
  • Posts: 21
  • Karma: +1/-0
Re: ARCHIVE: Head Bolts
« Reply #27 on: February 10, 2019, 12:51:08 AM »
How did these work out? Did you use the part numbers posted by Alaskan Ogre? I'm thinking I will go this way if everything is good with them.

Offline utherjorge

  • Global Moderator
  • Full Member
  • *****
  • Posts: 186
  • Karma: +2/-0
Re: ARCHIVE: Head Bolts
« Reply #28 on: February 19, 2019, 09:28:30 AM »
I know when I did my head, I got new head bolts for the guy to use. Not taking chances

Offline Bowie Kid

  • Newbie
  • *
  • Posts: 21
  • Karma: +1/-0
Re: ARCHIVE: Head Bolts
« Reply #29 on: February 19, 2019, 07:20:04 PM »
Thanks for the reply. I have new head bolts but would rather have arp studs if they are available, just to be sure. Never know, there may be a turbo in my future.   :13: