Author Topic: Clutch / Clutch Kits  (Read 13323 times)

0 Members and 1 Guest are viewing this topic.

williamJ.au

  • Guest
Re:Clutch / Clutch Kits
« Reply #45 on: February 17, 2011, 01:05:27 PM »
thanks guys.
 it took sometime for me to get familiar with new website format.

As Bill (rokbebop) , its OK now.

macfero

  • Guest
Re: Clutch / Clutch Kits
« Reply #46 on: April 27, 2011, 12:33:54 PM »
Hy.
Does the Rocky clutch fits the Feroza?

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Clutch / Clutch Kits
« Reply #47 on: April 27, 2011, 01:13:31 PM »
Hi macfero, yes. The US Rocky is a Feroza just a different name

ajtotal90

  • Guest
Re:Clutch / Clutch Kits
« Reply #48 on: May 12, 2011, 04:04:29 AM »
Any tips on doing the gearbox mount? It\'s next on my to do list. Can it be done without removing the transmission, as in can you disconnect a few bits and bobs and jack the trans up enough to do the mount?

Cheers!

Offline lioncubb

  • Hero Member
  • *****
  • Posts: 970
  • Karma: +42/-0
  • Gender: Male
Re: Clutch / Clutch Kits
« Reply #49 on: May 12, 2011, 05:31:01 AM »
Yes you can, all you have to do is remove the transmission support beam and then also unbolt the transmission mount, while holding the tranny up with a jack, very easy, quick and simple.
To many to list here as the limit is only 300 characters

ajtotal90

  • Guest
Re: Clutch / Clutch Kits
« Reply #50 on: May 12, 2011, 11:29:29 AM »
Sweet as. Also where\'d you get the replacement mount from? Have only been able to source second hand ones and would like a new one if at all possible.  Thanks mate!

Offline tramguage1

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 494
  • Karma: +12/-0
  • Gender: Male
Re: Clutch / Clutch Kits
« Reply #51 on: May 12, 2011, 10:55:00 PM »
I have gotten two of the wrong ones here in the states.A company named Anchor manufacturing shows a part # 8812 but it is wrong.I am in the process of contacting them to find the problem.
1990 ROCKY
2004 Chevy 4.3, 1993 4L60E trans,
1980 Toyota transfer case, front and rear axles
Lockers front and rear.

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Clutch / Clutch Kits
« Reply #52 on: September 22, 2012, 10:13:14 AM »
I\'m looking around for a clutch atm. Although the DHK-6873HD certainly looks the way to go I did happen to stumble accross this for a potential option, a hell expensive 1 all be it. Never heard of them before but then I ain\'t been around much. Anyone familiar with them?

http://www.ebay.com.au/itm/Paddle-Clutch-Kit-DAIHATSU-Sportrak-Feroza-Rocky-1-6-16v-F300-89-93-/170700917649?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27be914b91

@ Tramgauge, how u doin\' buddy? You ever sort out your mount issues? I need some of them too but they\'\'re dam expensive in Aus even on EBay. I\'ve seen the engine mounts on US EBay for a fraction of the price but not too sure of the quality. Anyone seen anything notable lately, including a decent price on the exedy clutch, best I\'ve found so far are all around the 350 mark.

@rokbebop hey mate. So how\'s the clutch going after a few k\'s? Happy with it?

Offline tramguage1

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 494
  • Karma: +12/-0
  • Gender: Male
Re: Clutch / Clutch Kits
« Reply #53 on: September 22, 2012, 12:43:37 PM »
No I used the one that I removed from my 90 rocky. I have the old one on the shelf in my shop,I will get it out and make some phone calls next week.
Sorry I haven\'t followed up on this .I have been working on my beast build.
1990 ROCKY
2004 Chevy 4.3, 1993 4L60E trans,
1980 Toyota transfer case, front and rear axles
Lockers front and rear.

rokbebop

  • Guest
Re: Clutch / Clutch Kits
« Reply #54 on: September 24, 2012, 11:02:43 PM »
good to see you back roza31

as Exedy are one of the largest manufacturers of clutches in Australia and they manufacture nearby they are pretty cheap.

the pink heavy duty clutch mentioned before is still going strong but the \'outback extreme\' one in my widetrack is awesome. idk if its just the car but the gear changes are really smooth and fast. i reccomend


rokbebop

  • Guest
Re: Clutch / Clutch Kits
« Reply #55 on: September 24, 2012, 11:08:57 PM »
the paddle clutch would likely wear out pretty fast. the less surface area the pressure plate has, the more any surface is going to comparatively wear. the pressure plate transfers all of the cars energy to the driveline so if a clutch like that was slipping driving up a hill, you wouldnt really need to be that surprised. this is just my opinion though. your driving a feroza not a charade

Offline lioncubb

  • Hero Member
  • *****
  • Posts: 970
  • Karma: +42/-0
  • Gender: Male
Re: Clutch / Clutch Kits
« Reply #56 on: September 26, 2012, 06:53:02 AM »
I agree with rokbebop here also, remember it is a 4WD, if you do go off road the paddle clutch will not with stand the stop/start up-hill/down hill strain, I think it would burn out pretty quickly.

It is designed more for performance cars, rather than a 4WD.
To many to list here as the limit is only 300 characters

Offline roza31

  • Hero Member
  • *****
  • Posts: 546
  • Karma: +9/-0
Re: Clutch / Clutch Kits
« Reply #57 on: September 26, 2012, 10:38:08 AM »
Thanks guys.
DHK arrived today, didn\'t see your post till too late Bop but still I reckon I\'\'ll be happy with the Exedy. G\'box and TC rebuild kits arrived from West Aus too. I gotta  get a new build thread happening.

Offline High PSI

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Clutch / Clutch Kits
« Reply #58 on: October 24, 2017, 04:24:23 AM »
good to see you back roza31

as Exedy are one of the largest manufacturers of clutches in Australia and they manufacture nearby they are pretty cheap.

the pink heavy duty clutch mentioned before is still going strong but the \'outback extreme\' one in my widetrack is awesome. idk if its just the car but the gear changes are really smooth and fast. i reccomend



Do you have a part number for the "Outback Extreme" clutch? I went to their website (https://www.xtremeoutback.com.au/en/catalogue) and they only have clutches listed for Rocky's w/ 2.8 litre Diesel engines. Do our Ferozas use the same clutch?

Offline High PSI

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Clutch / Clutch Kits
« Reply #59 on: November 07, 2017, 09:48:42 PM »
good to see you back roza31

as Exedy are one of the largest manufacturers of clutches in Australia and they manufacture nearby they are pretty cheap.

the pink heavy duty clutch mentioned before is still going strong but the \'outback extreme\' one in my widetrack is awesome. idk if its just the car but the gear changes are really smooth and fast. i reccomend




Do you have a part number for the "Outback Extreme" clutch? I went to their website (https://www.xtremeoutback.com.au/en/catalogue) and they only have clutches listed for Rocky's w/ 2.8 litre Diesel engines. Do our Ferozas use the same clutch?

Did a bit more research and found it - it's the "KDA20001-1A", commonly just called the "Xtreme Heavy Duty Organic":

http://www.ozparts.eu/pdf/XtremeOutbackCatlogue_2016.pdf

It's shown orange within the catalogue, but I'm guessing the one I get will be purple as that is how it is shown elsewhere as just the Xtreme Heavy Duty Organic.

 I'm going to go with this over the Exedy HD based on rokbebop's recommendation and the fact that I found it on sale for $250AUD shipped ("list" is apparently $415.80, though it regularly sells on eBay for ~$290), which is about $120 less than the best price I could find the Exedy HD at. Excited to give it a go.