Courtesy of: http://dougfreeze.com/daihatsu/burlz/index.html
This is a home made snorkel using 70mm pvc plumbers pipe.
You will need:
aprox 2m of pipe;
one 90deg elbow;
two 45deg bend;
Snorkel head from 4x4 shop;
two metal sadles bent to shape;
two large hose clamps;
rubber trim;
80mm holesaw and electric drill;
pvc glue;
paint or black tape;
And some flexible hose.
DIRECTIONS:
- Remove factory intake tube from airbox.
- Cut two pieces of pipe at 700mm long.
- Assemble as shown in pic but do not glue yet.
- Hold assembled parts against guard and mark position of hole in guard (measure twice cut once)
- Tape area to be drilled to avoid damage to guard and drill through outer and inner guard with holesaw.
- Paint edges of cut hole with anti rust paint and cover with rubber trim
- Cut another peice of pipe 300mm long and insert into hole in guard
- Attach assemlbed parts to pipe in guard and allign them to shape of pillar and mark joints
- Dis assemble and glue parts together. make sure joint marks line up. glue to intake pipe in guard
- Connect to airbox with flexible hose and clamps.
- Bend sadles intoP shape and fix snorkel to pillar with self drilling screw.
- Finally place head on pipe and tighten, stand back and admire your handy work before you pull it off to paint it.
GOOD LUCK
